The above video goes away if you are a member and logged in, so log in now!
Matrix Infinity stuck on "programming please wait"
Matrix Infinity stuck on "programming please wait" –
I have now seen three posts with regard to Matrix Infinity ( blue dot) having problems with the firware upgrade where people are being presented with the screen which says "Programming please wait".
Having experienced this myself recently, I contacted Infinity Mods to see if they had any ideas as to what the problem may be as I had changed the chip for another on the same wires and it worked without problems.
I then tried the suspect chip with three different consoles and had no luck, it simply would not take the firmware.
Luke at infinity asked if I could try putting a little solder paste on the legs of the eeprom and go over them with the iron as he thought it might be a bad connection.
However I tried this but it still wouldn't work, so I sent it back for replacement.
It would be interesting to see if there are more of these problems, so would invite anyone having the same symptoms to post.
I have 3 mods ere with a red dot in the corner. They all have the symptons you mention.
I've tried them in 2 x v12 ps2's. It must be the mods as I tried a blue dot and that programmed fine.
I here ppl mentioning the diode and rewiring from the mod to 5.5v which in the v12's is used by the laser fix (comsoft version 4). I havent tried this as i dont really wanna disconnect the laser fix!
use the ice 5v for your alternate 3.3v mi
and use the subzero 5v for the comsoft 5v
Thanks for the info and help but the unit still does the same
Originally Posted by thc013