Matrix Infinity Red Error Screen

[rdrrc]

Hey this is all the info i have
-Anykind of ps2 game(burned and original)bring me to the red screen with the error message "Please insert a Playstation or Playstation 2 format disc.
-Ps1 games boot but some burned ps1 games don't
-Dvds are able to play
-Found 2 pinched wires but didn't think i needed 2 replace them
-Tried disabling the modchip but still get error screen
-When i try to fast boot with the ps2 games i get a black screen
-Some ps1 games boot to a screen with blocks and its music but if i hold circle it boots and i can play
-Playstation Driver = 1.11
-Console = SCPH-70006
- DVDs im using = maxell DVD+r/TDK DVD-r
-All these games worked b4 but they all just suddenly stopped working
Please help if you have any knowledge on this and ill get more info soon
thank you

[ZootAllures]

Sounds like laser problem. People sometimes say O it worked before I modded it. But the truth is It probebley had trouble to begin with. Every system I mod I check before and some load right away and some go to the menu screen then load If that is the case Menu then load on original DVD game this means the lens is on its way out and not a good system to mod. Cleaning the lens helps sometimes also a fine adjustment of the lens helps in some cases. Mosy often it does not do any good to clean or adjust. Also +R disks are a NO NO not good. Use only -R disks.

[rdrrc]

o umm what i meant by it worked before was with the modchip installed... it worked for like 10-11 month and it just suddenly stopped... im really confused because if its the laser... then how can it still play ps1 games!??

[rdrrc]

NEW DISCOVERY!! when i put in the game... i hear it start to spin then it stops but then it goes to the red screen. is that because it thinks that its not a ps2 game? i really need help -.-

[mann75]

need new laser

[rdrrc]

i asked someone from matrix about this and he said "no, if it is a laser problem it cannot read anything." but the ps2 can play ps1 games and dvds... this is really weird

[rdrrc]

i opened the lid of the ps2, pressed the button "that makes it see if the lid is open or not" down and removed the little brake and i saw it start spinning and just stop. is it because of the pinched wires in my ps2?

[rdrrc]

plz help me -.-

[_zaphod_]

"can read X but not X" is either laser or wiring problem.

replace the crimped wirres, and try again.

[rdrrc]

hmm i think i did find some cold solder points. can someone tell me what letters on the modchip are responsible for ps2 games?