Matrix Infinity Green Dot Problem-HELP!!

HOLLOWMAN7 · 12-16-2005,12:16 PM

I have a slimline PS2 v12. After I installed the MI green dot chip and checked all the solder points, when I turn on the unit the light turns green for a second then back to the red (off) light. What am I doing wrong? Just purchased the MI chip-Its not a fake.
HElP!!!!!

**Ex-CON** · 12-16-2005,02:29 PM

check your fuses. I im pretty sure you poped one. I had the same problem.

HOLLOWMAN7 · 12-16-2005,03:37 PM

I am pretty good at xbox mods but kinda new to the ps2 mod scene, how would i fix the fuse if I popped one? Any help would be greatly appreciated.

**Ex-CON** · 12-16-2005,04:20 PM

Go to http://www.psrtech.co.uk/fuses/v12-gh-032-fuses.jpg

with your multimeter, set it to ohms. Put the rods on the oposite sides of the fuse. If you get a reading of anything else then 0, you have to replace that fuse

**N£TM£ÇH** · 12-17-2005,01:17 AM

disconnect wires A-B-G-H-I and see if the problem still exists... Its very possible that you scraped the ground around the via's and shorted one of the points. That would cause your problem.

User Tag List

Thread: Matrix Infinity Green Dot Problem-HELP!!

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!