Matrix Infinity doesn't detect the disc.

**ash_link** · 12-31-2008,03:15 PM

PS2: v12
Modchip: Seems like some sort of clone, v1.39

So I installed the modchip, it worked fine for a few months and suddenly, it won't detect any discs. The laser works fine, I tried it on another ps2 and it worked flawlessly and spun the disc.

What happens is, I put in the disc. Power on the PS2, cover the sensors so that the laser can do it's thing. The laser goes into the middle of the disc and shines it's red goddess on my disc. What's this?! the disc doesn't spin. I look at LaunchELF it reads "No disc", so I reset the ps2, so it goes to the normal browser. Same thing, "No data".

Long story short, It seems that my PS2 fails to read that there is a disc. After I had done this, I put the laser in my other ps2 and put in a disc and it found it. What would be the problem? Which wire does the disc detecting?

**amp2006** · 12-31-2008,03:23 PM

its seems there is something wrong with the Chip check all the wires and all solder points ..

**ash_link** · 12-31-2008,03:32 PM

Originally Posted by amp2006

its seems there is something wrong with the Chip check all the wires and all solder points ..

I will do, is there any points I should check? Like F or Y or something?

**amp2006** · 12-31-2008,03:54 PM

well use Multimeter to check them ..iam not good into solder stuff but if you are you will know ..

**ash_link** · 12-31-2008,05:30 PM

I checked all the wires and everything seems to be all in place and held together. I wonder what's up.

User Tag List

Thread: Matrix Infinity doesn't detect the disc.

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!