The above video goes away if you are a member and logged in, so log in now!
Matrix Infinity - Blank Screen after install
Matrix Infinity - Blank Screen after install –
i just did my first matrix infinity mod chip install on my PS2 V5. the unit powers up fine with the lights and everything but i just get a blank screeen. i've already checked the soldering and can't find anything wrong with it. any ideas? thanks.
Sounds like a pain but now you should remove the chip and make sure it works normally. Then install the chip again.
what board version you got ?
Originally Posted by jamese
for no video problem , check shorts on BIOS and on CONTROLLER IC. (B-I points)
hi there, i've got GH015.. i've removed the chip for now and the unit still works (thank goodness). i'll resolder it again sometime today or tomorrow, it may have been just a wire that have come off due to a weak joint. i'll let you know how i do with it.. thanks for the suggestions.
damn, i hear thsese things so many times. i wish any install would go just 100% ok
my opinion is that those ps2 are just too old, i mean from version V-5, its kinda hard to make it work due to the crappy laser installs from sony :S
well, i've resoldered (and desoldered and then resoldered) the chip today with no luck (still getting that darn blank screen). i think that it's a problem with the chip itself. i've resoldered and desoldered for quite a number of times now to no avail and it's giving me a headache wondering why it won't work...arrrgghhh
well, i've tested the mod chip for continuity and i'm not getting anything on A and RST.