The above video goes away if you are a member and logged in, so log in now!
HELP!!!!! I attempted to mod my V9 and I get blank screen!
can you post a pic of the lifted leg - is it still intact. check around all the places that your soldered. its easy to splash solder around. also check around the bios chip.
It is still intact. Where the others are in a position like an L this one is like a 7. I have tried to solder it back on, not sure if it worked. Am worried that further fiddling with it will cause it to break. Sorry, no pics at the moment, I'm at college. Will try to post pictures later.
And I checked (roughly, by eyesight only) around the BIOS and redid the O wire, there was a slight improvement. The reset/power button works now.
check with a magnifying glass - you only need a small short and it can cause all sorts of problems. Also check all of the fuses and see if any of them are blown.
Worst case - remove the mod and see if the ps2 still works.
I have a naff magnifying glass. Oh well. Thanks anyway, I'll give it a try.