green dot install, no effect

**spartan05** · 01-22-2006,07:40 PM

Sorry I am short on time, but here we go.

I have a v2 PS2 and I jsut installed the chip, soldered all the points got under the board for the SX and Y solders and put it all back together. I just plugged it in and it boots normally.... as if I hadn't done anything at all to it. It recognizes the official ps2 discs, but when clicked it will go to a black screen I hear a noise, apparently from the reader and then it goes back to the (mem/cd menu). Can anyone suggest what I did wrong?

Thanks for any help you can give.

**dungbeetle46** · 01-22-2006,07:46 PM

the only thing you can do is recheck all wiring, make sure power and ground are thicker wires and ground is as short as possible, check all wires connected properly and in the right spots
cheers

**spartan05** · 01-23-2006,12:11 AM

hrmmm so the power and ground have to be the thick wires? Dang, should've guessed that Doh!

Thanks alot that just may be my problem, nice that no instructions that I have found say that

User Tag List

Thread: green dot install, no effect

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!