The above video goes away if you are a member and logged in, so log in now!
Got two Matrix Infinity logos at once... Help.
Got two Matrix Infinity logos at once... Help. –
I have mod two ps2 v14 with matrix infinity v1.68. When I reboot the ps2 I get two matrix logos at the screen. Like its a inteferens with the signal... But when the originak ps2 menu comes, every thing is normal. Then when I lanch a game copy the screen goes dobble... What i wrong?? (It's a PAL) Motherboard GH-040-12.
Check the chip and the motherboard for any solder splashes or chips being grounded.
Thanks, but I have tryed to get at better ground point, that didn't work. I know the wiring is right. I have tryed 3 diffrent Matrix chips, every one gave the same problem. I have flashed the bios seversal times to be sure. (v1.68) Tryd thikker cables to 3.3v... whats wrong...?
I think that problem comes when you try to load a pal ps2 on a ntsc or a ntsc ps2 on a pal television. The screen runs a couple of times. When you boot the playstation and hold circle+triangle you get in the matrix config menu. Check of the top option is set on non. If so, you should change it to your region tv (NTSC for america and PAL for europe)
If that doesn't work I dont know what it could be