PS1 PM-41(2) hex file question

[Pino]

Originally posted by mitroux
ps ino why you still use pin 2 and 7?!just conect to pin8(less connections and the same result +sometimes with pins2,7 not to gnd game take more times to load at forst boot compared to simple connection

you have less connections in standard mode (pin 2-7 to ground), but I think that you cannot load antimod games.
With the first version it is therefore, is'nt it the same thing?

[cipcipstore]

Originally posted by Pino
you have less connections in standard mode (pin 2-7 to ground), but I think that you cannot load antimod games.
With the first version it is therefore, is'nt it the same thing?

I have try to install pin 6 on the other side of capacitator. Why don't work anyting?

[Pino]

cipcipstore: are you sure to use onechip?
Have you scanner or digital camera to post img your installation?
If load anything you have to verify it.

[NECNEC99]

@ cipcipstore

Just do it as the pinout I posted.
I did 4 last night and they all work.

And if you don't use all 8 pins the A MOD games doesn't work.
Use all 8 pins.

Cheers

[NECNEC99]

@ Pino

I've got a problem with the pinout you posted for
1.) Pin 2 must be at the other side of the resistor.
2.) Pin 6 must be at the other side of the cap.

Sorry for that I don't wanna be a dick but I know that my pinout works 100% with all games.

[Pino]

necnec99:
for Pin 2 is indifferent one o other side of the resistor, you can try. For pin 6: have you read all of this tread ? I also thought that one.
Thanks to mitroux I experimented that chip works very well if pin 6 is connected to pin 35 of the IC 732 like in my Attachment: psone-v2.jpg that you see over. It works very great. If you connect it to pin 36 (other side of the cap) you will have noise and the disc will not be read well.