Downloads: MultiMode v1.5 [EUR]
MultiMode v1.5 [EUR]
Version 1.5 exactly the same as MM1.4 except for the following .....
We have had to remove flawfixing/Temp Compensation , We have had to create
seperate HEX files for the 3 different regions and we have added the new
Dino Mode has 10 levels all accessed from the reset button .. press and hold
the reset button for at least 3 seconds to enter "Dino Mode1" , press reset again
to move to "Dino Mode2" , press again for "Dino Mode3" ...pressing
reset 11 times disables the chip until you power cycle the machine.
It should be possible to get all Antimod games to play by selecting the
correct "Dino Mode" for that game and that Model .. infact if you just connect
the normal 4 wires and add the 5th wire for reset this chip should be capable
of playing all games BUT "Dino Mode" has only been actually tested on 5 Anti-Mod
games so far including of course "Dino Crisis".
It's probabily better to connect all 7 wires where "Dino Mode" is currently only
required for Dino Crisis ... this way you know that all games will load ...
|There are no comments yet.