PSX-SCENE Forum Discussion for Sony PlayStation/PsOne/PS2/PS3/PSP/PS VITA
  • [UPDATE#4] Rogero CEX-4.21 CFW & LV0 Keys Released

    Update #4 Rogero has released version 1.09 of his 4.21 CFW. please check the MD5 before installing you can do so with this App. LINK. See below under UPDATE #4 for all the download links and information from upgrading to V1.00 to 1.09 .

    This update has fixed many of the bricking issues in the previous v1.00 release. As with any CFW installation do your research if you are someone without a hardware flasher. Also be sure to checkout Rogero official release thread @ tortuga-cove before installing to make sure no information posted below has changed in update #4.







    PS3 Developer Rogero known for his other CFW (such as no-check Downgradable FWs) & Backup Manager. Has made use of the recent lv0 keys that have been leaked an released. Soon after Bluedisk CFW was cracked the lv0 keys for 4.21 were leaked in the wild. So that paved the way for new CFW.



    Rogero CFW can only be installed on a PS3 running 3.55

    v1.00 changes
    • This is a 4.21CFW spoofed to version 4.25 to allow SEN access

    • It can be used as a normal System Update from any 3.55 OFW/CFW/MFW

    • It was tested using a hardware flasher and no bricks or any problems at all were encountered

    • It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed

    • Games must be loaded from Disc Icon (with Original game in BD) and not from app_home

    • Current 3.55 homebrew application can't be loaded on this CFW, applications must be re-signed properly.

    • Downgrading back to 3.55 is always possible using hardware flashers and will be tested soon using software methods.


    UPDATE #1
    (New/Updated Info in Blue)
    Source: Tortuga-Cove

    ATTENTION:

    1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

    2- Always make a NOR/Nand dump using multiMAN or memdump before installing this CFW to have a recovery backup in case of any bricks.Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.
    ** A Hardware Flasher alone without a valid dump cannot fix your bricked PS3 **


    3- It's always better to have QA flag set (leave it Enabled) on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg


    4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

    5- TrueBlue CFW users must update back to OFW3.55 before installing this CFW to avoid possible bricks.


    **Credits to eussNL and the PS3DevWiki for the valuable and always up-to-date source of information.
    **Credits to Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.
    Update #2
    Source: Tortuga-Cove

    Downgrading back to 3.55 is always possible using the following steps :

    • Download the 4.25 downgrader PUP ---> 4.25 Downgrader Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db

    • Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"

    • While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.


    • Start the PS3 into Recovery Menu (or use Condor Updater for Slim consoles) and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)

    • Once the install is finished, you're now back on Rogero CFW3.55 v3.7 ( from here it's better to dehash again before installing any other OFW/CFW 3.55 )
    Update #3
    Source: Tortuga-Cove



    After Testing with some bricked Slim consoles ( from updating to CFW4.21 ) with different friends and testers around the world,
    I can confirm that Bricked consoles can be recovered back to CFW3.55 even if you didn't have a NOR Dump/Backup .


    Requirements are:
    1- a Hardware Flasher so you can read/write to the PS3 NOR flash
    2- A Dongle with PSgrade payload (any old jailbreak dongle + PSGrade hex will do) used to Enter Factory Service Mode (FSM)
    3- Rogero CEX3.55 v3.7 PUP

    for more details about Recovering from the Brick please check this new thread ----> Brick-Recovery Procedure from CFW4.21 back to CFW3.55

    Note:
    - I didn't receive any Brick report from any FAT PS3 that updated to CFW4.21, so it seems FAT consoles are not being affected by the bug.

    - Apparently only the last downgradable Slim models are affected (CECH-25xx with Datecode 1A and base FW version = 3.50)

    - I Also know that there are also few Slims that bricked with model CECH-20xx but 90% of the reports were model
    (CECH-25xx with Datecode 1A and base FW version = 3.50).

    - The Brick may be caused by the boot-loaders not being written correctly into the NOR during the Update process.

    Please note also that all the above info may not be 100% accurate,
    things are still being worked on so nothing is confirmed at all and I don't promise anything about an updated CFW.

    -RogerO


    Update #4
    Source: Tortuga-Cove



    Rogero CEX-4.21 CFW v1.09 Free for All


    update ---> Rogero CEX-4.21 v1.09

    mirror --->
    Rogero CEX-4.21 v1.09

    MD5:
    e777351e788a7eb4007a2280abca7fbd


    Size:
    192 MB (201,329,483 bytes)


    For details about Updating from CFW4.21 v1.00 to CFW4.21 v1.09 please read the Update Guide below



    For details about Recovering from v1.00 Brick please check this thread
    ----> Brick-Recovery Procedure from CFW4.21 back to CFW3.55

    v1.09 Details and Changes

    - Compatibility problem with some Slim models (CECH-25xx) is now fully fixed.
    - XMB Icons problem from in-game PS button is now fixed.
    - Loading games from App_home Icon is now fixed.
    - Many other fixes from version 1.00 for a better performance and added stability.
    - It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
    - It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
    - Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
    - Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.

    Updating from CFW4.21 v1.00 to the CFW4.21 v1.09 should be done using the following steps :


    1- Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )
    ---- Downgrade back to ver3.55 using the guide above.
    ---- Once on Rogero CEX3.55 v3.7 you can update again from Recovery Menu into the new CFW4.21 v1.09

    2- Alternative Way ( CFW4.21 v1.00 --> Recovery Menu --> CFW4.21 v1.09 )
    ---- You can try updating from CFW4.21 v1.00 to CFW4.21 v1.09 from Recovery Mode first.
    ---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )





    Rogero CEX-4.21 CFW v1.09 Free for All
    Official Download Link: Rogero CEX 4.21 CFW
    MD5: e777351e788a7eb4007a2280abca7fbd
    Size: 192 MB (201,329,483 bytes)
    Mirror #1 MultiUpload


    Update:
    multiMAN 04.08.00 is Rogero 4.21 CFW compatible
    Here is CFW 4.21 Eboot Resigner


    Source of KEYS: ps3crunch.net
    Source of Rogero CFW: Tortuga-Cove


    Thanks to thenat17 & randomstuff for the member submissions of this great news.

    PSX-SCENE: The Pinnacle Scene Xenocracy
    Comments 1376 Comments
    1. Mentalist's Avatar
      Mentalist -
      Tried to boot RE 6 but in only shows my original game on my XMB =(
    1. Spectator's Avatar
      Spectator -
      Quote Originally Posted by Mentalist View Post
      You have to enter in recovery mode!
      Dont know why some people says that, updated from XMB no problem.. Only situation that would apply for going to recovery mode is if you have a fat ps3 since it wont recognize it unless you are on recovery mode
    1. rimi's Avatar
      rimi -
      OK again tested another CFW and it works,

      CECHA - Works Fine!
      CECHC - Works Fine!
      CECHK - Works Fine!

      Tried downgrding and it cant using the software method unlike in Bluedisk version which is you can without a hardware flasher's help.
    1. Spectator's Avatar
      Spectator -
      Quote Originally Posted by Mentalist View Post
      Tried to boot RE 6 but in only shows my original game on my XMB =(
      You installed GAMEDATA3.pkg right? its inside apps_ps3_cfw->CFW 4.21
      Took me some time to figure it out too :P whats worse is everytime u reset ur ps3 u must run GAMEDATA first for bdemu to work on MM, i guess its a start
    1. Mentalist's Avatar
      Mentalist -
      UHUL!!!!! Just booted RE6 do not use Hermes BD in multiman settings! HAHA this will be a looong night playing RE6!! I am so happy! Just did this during a storm! THANK ROGERO!!!
    1. glennie's Avatar
      glennie -
      what do i do
    1. zdriver300's Avatar
      zdriver300 -
      about to install this cfw anything need to be backed up beforehand?
    1. glennie's Avatar
      glennie -
      cwch-2501b never was on 3.55 Rogero
    1. lguarda's Avatar
      lguarda -
      Anyone having the same problem as I am? All games gives 80010017 error.
    1. barelynotlegal's Avatar
      barelynotlegal -
      running good. freesh up[date of MM . when i first installed .7 it said no bd emulating so i updated and i didnt mention anything about it, but i cant get MP 3 to play(zombiekillahs patch requires BD em.) and COD MW 3, but then i thought to myself.
      i could just redownload all game data from sony LOL, then no patches, no errors?
      just finished RE 6 demo from PSN

      noticed Fat princess and my othen React psn stuff doesnt work,(figured it woudnt)

      EDIT: once RE racoon city finishes backing up i will check my slim model.(Slim netflix/move bundle 320 gig)
    1. PatrickBatman's Avatar
      PatrickBatman -
      Quote Originally Posted by Mentalist View Post
      UHUL!!!!! Just booted RE6 do not use Hermes BD in multiman settings! HAHA this will be a looong night playing RE6!! I am so happy! Just did this during a storm! THANK ROGERO!!!
      Yeah use Standard payload
    1. Spectator's Avatar
      Spectator -
      Quote Originally Posted by lguarda View Post
      Anyone having the same problem as I am? All games gives 80010017 error.
      it depends on update data! what game are u trying out? if its like cod, go to gamedata and delete the mw3 gamedata then start the game, should work
    1. zdriver300's Avatar
      zdriver300 -
      so when i opened multiman it now says the bdrom isnt installed for this firmware. what do we have to do to get multiman working fully on this firmware?
    1. lguarda's Avatar
      lguarda -
      Quote Originally Posted by Spectator View Post
      it depends on update data! what game are u trying out? if its like cod, go to gamedata and delete the mw3 gamedata then start the game, should work
      Accutally are older games I had like Sonic Generations, GOW, etc. They were working but now won´t boot. Will I have to backup all my games again?
    1. Mentalist's Avatar
      Mentalist -
      Just Booted Journey =D The Psn version I've installed on Rebug it was not working and now it is with Rogero and Online =D gonna test the other games before I consume my life on RE6 XD! However when hit the home button in one time i can not see the options to go back to xmb it keeps refreshing! Just pressed the homebutton still to browse the quit game option! It is an workaround!
    1. glennie's Avatar
      glennie -
      tryed to install and now my ps3 wont turn on and recovey wont work what do i do
    1. Spectator's Avatar
      Spectator -
      @lguarda

      hmm honestly i am not sure, ive tried the old games i had too(ff13,ac2,acb,sly collection) they are all working fine. maybe not all games are compatible yet with 4.21? i even tried Dead or alive 5 and it gave me the same error.
    1. rimi's Avatar
      rimi -
      Suddenly FFXIII-2 Historia Crux saving bug fix on 4.21CFW
    1. Mentalist's Avatar
      Mentalist -
      Quote Originally Posted by glennie View Post
      tryed to install and now my ps3 wont turn on and recovey wont work what do i do
      What is your model?
    1. wmonte75's Avatar
      wmonte75 -
      Mine is CECH-2001B Can anyone confirm if it working?
  • Daily Digest


    Want to receive the latest PSX info in your email?

    Sign up for our Daily Digest!



    Want to learn more about the team keeping you up to date with the latest scene news?

    Read about them now!

    Check out our Developer bios, too!

  • Recent Threads

    Jacques Noiret

    Swap magic guide doesn't work

    Thread Starter: Jacques Noiret

    Hi All,

    I'm trying to follow the swap magic guide to install FCMB but it doesn't work.

    I'd give you the link for that guide

    Last Post By: Jacques Noiret Today, 02:05 PM Go to last post
    jaybeemoney247

    Hey

    Thread Starter: jaybeemoney247

    Hello am new here,what's good in this forum? Hope to enjoy my stay tho. Cheers

    Last Post By: DSAPSX Today, 01:14 PM Go to last post
    H8ncars

    This is why I waited to pre order GTA V

    Thread Starter: H8ncars

    Grand Theft Auto V Pre-Order

    Special Edition
    Collectors Edition
    &
    All Pre Orders will get the Pre-order Only

    Last Post By: Colt Today, 12:08 PM Go to last post
    Squallcloud

    Is there a list of PAL game that GMS works on yet?

    Thread Starter: Squallcloud

    Hello, I want was just wondering if there was a list in which it has every PS2 game which has been confirmed to work on GMS yet and what resolution mode

    Last Post By: Squallcloud Today, 08:25 AM Go to last post
    Anno1404

    Upgrading to Rebug

    Thread Starter: Anno1404

    Hello,
    I finally chose to upgrade to Rebug 4.41.2 cause i've been going crazy with finding fixes , changing E-Boots , games not working.

    Last Post By: Anno1404 Today, 09:01 AM Go to last post
    gunas4

    Multiman cant mount game

    Thread Starter: gunas4

    hi,i have problem with my ps3,i had downgrade,have installed rogero 4.40 and multiman it was working fine but,one day my joystick was broked and i did

    Last Post By: gunas4 Today, 07:47 AM Go to last post
  • Recent Comments

    krytonic

    Sony's Testing a Better, Faster Video Streaming Technology.

    I have to say that his entire point stands. It's not free on Comedy Central and you can't just turn... Go to last post

    krytonic Today 10:25 AM
    RandQalan

    English Patch version for Dynasty Warriors Strikeforce 2 PSP.

    Remember the rules this can get you in trouble :mad: Go to last post

    RandQalan Today 08:02 AM
    Staylecrate

    English Patch version for Dynasty Warriors Strikeforce 2 PSP.

    It is on my dropbox account, PM or email me your email and I will share the folder, it's 1.5 gigs. Go to last post

    Staylecrate Today 07:51 AM
    mad mike 96

    Comedy on Demand: Laugh Factory on PS3 Updated

    Anyone have a link to the .pkg for this one? Go to last post

    mad mike 96 Today 07:31 AM
    aldostools

    Fan Control Utility v1.7 Relased CFW 4.41 Supported!!

    75C in idle (reported by multiMAN) after a short session of play videos... but my ambient... Go to last post

    aldostools Today 07:30 AM
    suaveburn

    Sony's Testing a Better, Faster Video Streaming Technology.

    I agree i have dropped my cable provider and simply added an internet plan i pay 50 dollars a month... Go to last post

    suaveburn Today 06:50 AM
    qrange

    Fan Control Utility v1.7 Relased CFW 4.41 Supported!!

    thanks. could you please confirm, is that 75C in idle?
    my PS3 is slim, CECH-25xxB (iirc) ,... Go to last post

    qrange Today 06:25 AM
    Staylecrate

    English Patch version for Dynasty Warriors Strikeforce 2 PSP.

    Hey atreyu, I have the game. let me know if you want a copy to mess around with. Go to last post

    Staylecrate Today 05:51 AM
    eustolio

    SDAT Creator by oakhead69

    Under this method, you can create edat_decrypter_creator?
    Thanks for u work oakhead69! Go to last post

    eustolio Today 04:53 AM
    opium2k

    {Guide} Install multiMAN Themes via a PKG File

    Nice of them to mention me but I haven't my multiMAN themes in ages. Probably best stick with more... Go to last post

    opium2k Today 03:35 AM