PSX-SCENE Forum Discussion for Sony PlayStation/PsOne/PS2/PS3/PSP/PS VITA
  • [UPDATE#4] Rogero CEX-4.21 CFW & LV0 Keys Released

    Update #4 Rogero has released version 1.09 of his 4.21 CFW. please check the MD5 before installing you can do so with this App. LINK. See below under UPDATE #4 for all the download links and information from upgrading to V1.00 to 1.09 .

    This update has fixed many of the bricking issues in the previous v1.00 release. As with any CFW installation do your research if you are someone without a hardware flasher. Also be sure to checkout Rogero official release thread @ tortuga-cove before installing to make sure no information posted below has changed in update #4.







    PS3 Developer Rogero known for his other CFW (such as no-check Downgradable FWs) & Backup Manager. Has made use of the recent lv0 keys that have been leaked an released. Soon after Bluedisk CFW was cracked the lv0 keys for 4.21 were leaked in the wild. So that paved the way for new CFW.



    Rogero CFW can only be installed on a PS3 running 3.55

    v1.00 changes
    • This is a 4.21CFW spoofed to version 4.25 to allow SEN access

    • It can be used as a normal System Update from any 3.55 OFW/CFW/MFW

    • It was tested using a hardware flasher and no bricks or any problems at all were encountered

    • It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed

    • Games must be loaded from Disc Icon (with Original game in BD) and not from app_home

    • Current 3.55 homebrew application can't be loaded on this CFW, applications must be re-signed properly.

    • Downgrading back to 3.55 is always possible using hardware flashers and will be tested soon using software methods.


    UPDATE #1
    (New/Updated Info in Blue)
    Source: Tortuga-Cove

    ATTENTION:

    1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

    2- Always make a NOR/Nand dump using multiMAN or memdump before installing this CFW to have a recovery backup in case of any bricks.Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.
    ** A Hardware Flasher alone without a valid dump cannot fix your bricked PS3 **


    3- It's always better to have QA flag set (leave it Enabled) on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg


    4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

    5- TrueBlue CFW users must update back to OFW3.55 before installing this CFW to avoid possible bricks.


    **Credits to eussNL and the PS3DevWiki for the valuable and always up-to-date source of information.
    **Credits to Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.
    Update #2
    Source: Tortuga-Cove

    Downgrading back to 3.55 is always possible using the following steps :

    • Download the 4.25 downgrader PUP ---> 4.25 Downgrader Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db

    • Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"

    • While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.


    • Start the PS3 into Recovery Menu (or use Condor Updater for Slim consoles) and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)

    • Once the install is finished, you're now back on Rogero CFW3.55 v3.7 ( from here it's better to dehash again before installing any other OFW/CFW 3.55 )
    Update #3
    Source: Tortuga-Cove



    After Testing with some bricked Slim consoles ( from updating to CFW4.21 ) with different friends and testers around the world,
    I can confirm that Bricked consoles can be recovered back to CFW3.55 even if you didn't have a NOR Dump/Backup .


    Requirements are:
    1- a Hardware Flasher so you can read/write to the PS3 NOR flash
    2- A Dongle with PSgrade payload (any old jailbreak dongle + PSGrade hex will do) used to Enter Factory Service Mode (FSM)
    3- Rogero CEX3.55 v3.7 PUP

    for more details about Recovering from the Brick please check this new thread ----> Brick-Recovery Procedure from CFW4.21 back to CFW3.55

    Note:
    - I didn't receive any Brick report from any FAT PS3 that updated to CFW4.21, so it seems FAT consoles are not being affected by the bug.

    - Apparently only the last downgradable Slim models are affected (CECH-25xx with Datecode 1A and base FW version = 3.50)

    - I Also know that there are also few Slims that bricked with model CECH-20xx but 90% of the reports were model
    (CECH-25xx with Datecode 1A and base FW version = 3.50).

    - The Brick may be caused by the boot-loaders not being written correctly into the NOR during the Update process.

    Please note also that all the above info may not be 100% accurate,
    things are still being worked on so nothing is confirmed at all and I don't promise anything about an updated CFW.

    -RogerO


    Update #4
    Source: Tortuga-Cove



    Rogero CEX-4.21 CFW v1.09 Free for All


    update ---> Rogero CEX-4.21 v1.09

    mirror --->
    Rogero CEX-4.21 v1.09

    MD5:
    e777351e788a7eb4007a2280abca7fbd


    Size:
    192 MB (201,329,483 bytes)


    For details about Updating from CFW4.21 v1.00 to CFW4.21 v1.09 please read the Update Guide below



    For details about Recovering from v1.00 Brick please check this thread
    ----> Brick-Recovery Procedure from CFW4.21 back to CFW3.55

    v1.09 Details and Changes

    - Compatibility problem with some Slim models (CECH-25xx) is now fully fixed.
    - XMB Icons problem from in-game PS button is now fixed.
    - Loading games from App_home Icon is now fixed.
    - Many other fixes from version 1.00 for a better performance and added stability.
    - It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
    - It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
    - Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
    - Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.

    Updating from CFW4.21 v1.00 to the CFW4.21 v1.09 should be done using the following steps :


    1- Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )
    ---- Downgrade back to ver3.55 using the guide above.
    ---- Once on Rogero CEX3.55 v3.7 you can update again from Recovery Menu into the new CFW4.21 v1.09

    2- Alternative Way ( CFW4.21 v1.00 --> Recovery Menu --> CFW4.21 v1.09 )
    ---- You can try updating from CFW4.21 v1.00 to CFW4.21 v1.09 from Recovery Mode first.
    ---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )





    Rogero CEX-4.21 CFW v1.09 Free for All
    Official Download Link: Rogero CEX 4.21 CFW
    MD5: e777351e788a7eb4007a2280abca7fbd
    Size: 192 MB (201,329,483 bytes)
    Mirror #1 MultiUpload


    Update:
    multiMAN 04.08.00 is Rogero 4.21 CFW compatible
    Here is CFW 4.21 Eboot Resigner


    Source of KEYS: ps3crunch.net
    Source of Rogero CFW: Tortuga-Cove


    Thanks to thenat17 & randomstuff for the member submissions of this great news.

    PSX-SCENE: The Pinnacle Scene Xenocracy
    Comments 1376 Comments
    1. rob_1980's Avatar
      rob_1980 -
      Quote Originally Posted by inserttwo View Post
      Thanks. Yes, I'm on KMEAW, for the time being. I'm gonna wait a little bit. Probably until November to try this new things.
      This is not my work, so credit to the original poster (im simply copying and pasting a pasted quote)

      method to test if your console has been downgraded in the past:

      QA flag
      1. Quick format your USB flash drive to fat32.
      2. Place the toggle_qa.pkg file onto the root of your flash drive.
      3. Put in your PS3.
      4. Navigate to install packages and install the package.
      5. Go to Toggle QA app on the XMB and click X.
      6. You will here a beep and see a blackscreen, then it will return to the XMB. If it doesn't reboot and try again.
      Steps 7. + 8. are not necessary. I do step 7. just to make sure the QA flag worked.
      7. Then navigate to Network settings and press L1,L2,L3,R1,R2, and down on the d-pad.
      Now more options will appear in your menu.
      8. Navigate to Debug System Settings and enable it. (I did it without enabling this setting, but since e3 site says to do it in their guide, it doesnt' hurt.)

      Then Downgrade to any OFW , 3.55 is good

      If all goes well, you can then install any 3.55 CFW

      sorry, I dont have a link to qa flag.pfg?
    1. qsuh04's Avatar
      qsuh04 -
      Quote Originally Posted by barelynotlegal View Post
      updating netflix as we speak. and working!
      What CFW did u update from, would it work on rebug 3.55.2
    1. rob_1980's Avatar
      rob_1980 -
      Quote Originally Posted by barelynotlegal View Post
      updating netflix as we speak. and working!
      so all the latest psn demos will work too, didnt even think of that
    1. bitsbubba's Avatar
      bitsbubba -
      Quote Originally Posted by rob_1980 View Post
      This is not my work, so credit to the original poster (im simply copying and pasting a pasted quote)

      method to test if your console has been downgraded in the past:

      QA flag
      1. Quick format your USB flash drive to fat32.
      2. Place the toggle_qa.pkg file onto the root of your flash drive.
      3. Put in your PS3.
      4. Navigate to install packages and install the package.
      5. Go to Toggle QA app on the XMB and click X.
      6. You will here a beep and see a blackscreen, then it will return to the XMB. If it doesn't reboot and try again.
      Steps 7. + 8. are not necessary. I do step 7. just to make sure the QA flag worked.
      7. Then navigate to Network settings and press L1,L2,L3,R1,R2, and down on the d-pad.
      Now more options will appear in your menu.
      8. Navigate to Debug System Settings and enable it. (I did it without enabling this setting, but since e3 site says to do it in their guide, it doesnt' hurt.)

      Then Downgrade to any OFW , 3.55 is good

      If all goes well, you can then install any 3.55 CFW

      sorry, I dont have a link to qa flag.pfg?
      hasn't QA flag been changed on 3.56+
    1. bitsbubba's Avatar
      bitsbubba -
      Quote Originally Posted by barelynotlegal View Post
      updating netflix as we speak. and working!
      are you QA flagged? can you check if it also works?
    1. qsuh04's Avatar
      qsuh04 -
      Hey would this cfw work on 3.55.2 rebug straight from xmb
    1. rob_1980's Avatar
      rob_1980 -
      Quote Originally Posted by bitsbubba View Post
      hasn't QA flag been changed on 3.56+
      I dont know mate, Ive never downgraded a console, I read this is how to see if yours has by running it on 3.55, for those who purchased them 2nd hand i guess..

      personally, mine has kmeaw on, thats not patched, so i know mine was never downgraded.
    1. ivankene's Avatar
      ivankene -
      Can i install this, i am on kmeaw 3.55 cfw, but i was once downgraded my console with e flasher. is that safe to install this rogero cfw? please answer
    1. Ashaman's Avatar
      Ashaman -
      This is great news and much appreciated, i'm sure more good things to come from these hard working devs! You in the scene making these advances possible have many thanks from me. GOOD WORKS GUYS
    1. rob_1980's Avatar
      rob_1980 -
      Quote Originally Posted by ivankene View Post
      Can i install this, i am on kmeaw 3.55 cfw, but i was once downgraded my console with e flasher. is that safe to install this rogero cfw? please answer
      there goes my theory on kmeaw not working on downgraded consoles???

      but if you have downgraded, NO, dont install this!

      ps, did you not get trophy errors on kmeaw and downgraded console?
    1. Mentalist's Avatar
      Mentalist -
      Quote Originally Posted by qsuh04 View Post
      Hey would this cfw work on 3.55.2 rebug straight from xmb
      Install 3.55 OFW over it before updating to Rogeros It wil be safer!
    1. JonahUK's Avatar
      JonahUK -
    1. freestylemaster's Avatar
      freestylemaster -
      I was on TB firmware and when updating at %33, the screen went off and never came back. Waited for 10 mins but nothing happened so I tried to reset or turn off no luck. So, I unplugged the power cord and now I think I have hardbrick. When I press the power button, green light turn on but nothing happens. It does not even read the usb because usb light does not turn on. I was so excited damn. Anyone know if this is really hardbrick? Is there anything I can do? Please help. (ps3's factory firmware is 3.40 and it is never downgraded)

      Slim NOR ps3.

      (sorry for my english)
    1. bitsbubba's Avatar
      bitsbubba -
      Quote Originally Posted by rob_1980 View Post
      I dont know mate, Ive never downgraded a console, I read this is how to see if yours has by running it on 3.55, for those who purchased them 2nd hand i guess..

      personally, mine has kmeaw on, thats not patched, so i know mine was never downgraded.
      I just know peple couldn't get back to KMEAW from 3.56jfw with QA so was wondering, just trying to stop potential bricks is all (I don't think QA is the dehash method they speak of)
    1. amp2006's Avatar
      amp2006 -
      just a tiny Note for those who keep asking does this game work or not .

      according to Rogero Changelog this CFW can run Games up to 4.21 .so if any game made on that firmware then it should work .without needing eboots or other fixes.
    1. warz's Avatar
      warz -
      I downgraded my Slim PS3 from 3.55 to 3.41 using a PS3BREAK dongle. Has anyone upgraded to this Rogero's 4.21 cfw with any problems?
    1. ivankene's Avatar
      ivankene -
      Quote Originally Posted by rob_1980 View Post
      there goes my theory on kmeaw not working on downgraded consoles???

      but if you have downgraded, NO, dont install this!

      ps, did you not get trophy errors on kmeaw and downgraded console?
      everything working good, i don't have any problem with any game. i was olso on rogero 3.6 version and all was good. Now i am again on kmeaw
    1. rob_1980's Avatar
      rob_1980 -
      Quote Originally Posted by warz View Post
      I downgraded my Slim PS3 from 3.55 to 3.41 using a PS3BREAK dongle. Has anyone upgraded to this Rogero's 4.21 cfw with any problems?
      A few people are having problems.

      I would wait.
    1. barelynotlegal's Avatar
      barelynotlegal -
      crap gone for 20 mins and 30 post lol.
      TO all i was on itsakamel modified CFW, went straight to rogero.. i went to run multiman(the one i had before) got corrupted file system, though i did try to do a factory mode update with kmeaw. Q&A flagged?(i have never been past 3.55 so i would guess no? just got done restoring file system and multiman does not load will try a previous released(anniversary edition) version
    1. rob_1980's Avatar
      rob_1980 -
      Quote Originally Posted by ivankene View Post
      everything working good, i don't have any problem with any game. i was olso on rogero 3.6 version and all was good. Now i am again on kmeaw
      ah ok, I thought all those who downgraded had issues with kmeaw, thats why rogero released his cfw with the lv1 patches..
  • Daily Digest


    Want to receive the latest PSX info in your email?

    Sign up for our Daily Digest!



    Want to learn more about the team keeping you up to date with the latest scene news?

    Read about them now!

    Check out our Developer bios, too!

  • Recent Threads

    gonzule

    ReactPSN needed in new CFW 4.40 Miralatijera and Rogero?

    Thread Starter: gonzule

    Hi,

    I was wondering about how to use ReactPSN (its still not clear to me after reading 10000 tutorials). But, anyway, i started reading about

    Last Post By: gonzule Today, 03:18 PM Go to last post
    shengoro86

    Request for Help with Save File for MK9 BLUS30522

    Thread Starter: shengoro86

    Hi,

    I recently lost my PS3 to ylod and I now rely on my other PS3 (modded with 4.3x CFW) to play MK9.

    I really dont want

    Last Post By: shengoro86 Today, 01:56 PM Go to last post
    Berabouman

    Black screen when loading Resident Evil Revelations

    Thread Starter: Berabouman

    I get through the Verifying Data part just fine, and the game appears on the XMB, but when I actually load the game, all I get is a black screen. I've

    Last Post By: Berabouman Today, 12:59 PM Go to last post
    simbin

    URGENT PSP buying advice for noob

    Thread Starter: simbin

    I'm getting ready to purchase a PSP from a local seller but have some concerns.

    Several games were downloaded from PSN and are stored on

    Last Post By: LKJHGFDSA Today, 11:56 AM Go to last post
    smokie1313

    serious issue here PLZ HELP

    Thread Starter: smokie1313

    okay here it goes
    i got 4 ps3 cech-3001a/b that shut off 2 secs after trying to power up
    red green then no lights at all

    Last Post By: atreyu187 Today, 02:22 PM Go to last post
    sparker781

    Sleeping Dogs Add-Ons

    Thread Starter: sparker781

    Hey All

    Thanks for stopping by. Essentially I can get the add-ons with no problem...But am not sure if I am doing something wrong cause

    Last Post By: sparker781 Today, 10:36 AM Go to last post
  • Recent Comments

    aldostools

    Some Updates To PS3 Tools Collection

    In the last 5 days, I have doubled the entries in its database of dev_klics, so now it should be... Go to last post

    aldostools Today 02:00 PM
    barelynotlegal

    Brunolee Updates TMC Themes For multiMAN - Releases Theme Control Tool

    yep, crashes on win8, win7, vista, all compatibility options is a crash Go to last post

    barelynotlegal Today 12:37 PM
    barelynotlegal

    Some Updates To PS3 Tools Collection

    WOO HOO.
    "TIP: After you resign and replace your trophies, it is required to Rebuild Database... Go to last post

    barelynotlegal Today 12:31 PM
    der Warst

    Release: PS2 Linux Live DVD Version 3

    Hey,

    Do you have any idea if it's possible to run the ps2 port of effectv with it?
    I'm not... Go to last post

    der Warst Today 12:25 PM
    afehst

    Some Updates To PS3 Tools Collection

    oohw, thanks, i allready was waiting for a update.... Go to last post

    afehst Today 12:12 PM
    fatattack

    3K3Y -- PS3 Blu Ray ODD Emulator

    which is a stupid way in the first place.
    use the xkey controller and you're safe since this does... Go to last post

    fatattack Today 11:08 AM
    XxUnkn0wnxX

    Brunolee Updates TMC Themes For multiMAN - Releases Theme Control Tool

    this tool wont even start in windows 8 - it say multiman theme controll.exe has stopped working Go to last post

    XxUnkn0wnxX Today 11:04 AM
    ONEDEADLYVENOM

    New Multiman Themes by hcode123

    Hi hcode123, I just wanna say a gracious thank you to you!

    I'm loving the themes that you... Go to last post

    ONEDEADLYVENOM Today 09:46 AM
    alzaabi

    BwE NOR Validator v1.30

    thank you very much but does this really patch Nor Dumps ?
    or just validate it ? Go to last post

    alzaabi Today 04:03 AM
    TheShadowRunner

    PS2 Controller Remapper v1.00 - by pelvicthrustman

    Woah totally awesome app, pelvicthrustman!
    A suggestion, could you extend the functionality for... Go to last post

    TheShadowRunner Today 02:32 AM