I just bought a new Bluetooth Adapter 3.0 and was working about 1 hour to get my controller working via bluetooth because Motioninjoy doesn’t support it…
The thing is that many 3.0 & 4.0 adapters are unsupported with Motioninjoy.
If you have the same issue then here’s a possible solution:
- First make sure you have ALL old drivers completely REMOVED!
- Insert your Bluetooth Adapter and install it with the original bluetooth software
- After the installation you need to get the MAC address from your bluetooth adapter (Bluetooth settings -> Hardware)
- Install the Sixaxis Pair Tool (DOWNLOAD HERE)
- Plug in your PS3 Controller
- After the installation start the Sixaxis Pair Tool and plugin your PS3 controller (It will install a driver to change the MAC address)
- After the driver installation enter your bluetooth adapter MAC address (with “:”) and click UPDATE!
- Close Sixaxis Pair Tool
- If you have done this then go to your bluetooth suite and add a bluetooth device, make sure you push the PS button when searching! continue without pair codes etc. … (Don’t be irritated by the non stop flashing of the controller)
- Now install Motioninjoy (DOWNLOAD HERE)
- Do not start it after installation!
- Re-plugin your PS3 Controller
- Start Motioninjoy and INSTALL ONLY the PS3 Controller (via Load Driver)
- The bluetooth adapter driver will now also be overwritten but it will work.
If you have followed these steps then you should be able to have a working bluetooth connection with your PS3 controller.
Source: SvenGDK via Ps3hax