[UPDATE: #1] RetroArch 0.9.8 Beta 3 Unofficial Standalones

Published on 12-27-2012 01:20 PM

21 Comments

Update: The unofficial standalones are now playable on 4.30 CFW. My apologies for taking so long. Holidays and other things have kept me busy. Thanks for your patience.

Following the release of the "RetroArch 0.9.7 Unofficial Standalone Emulators" I released a couple of months back. Now I have updated those standalones to the 0.9.8 Beta 3 versions from the compile by pete_uk recently released. This time around I decided to do each system and then each libretro core. The system standalones are for "XMB eye candy" as you will have multiple installations of the same core with different artwork and Title ID's if that core emulates multiple systems. So if your not a fan of multiple installation then use the Standalone Cores where it is each libretro core split up to a standalone.

I still would recommended using the official setup (Multi-System Emulator), however I do realize that many people prefer standalones for a variety of reasons. So that why i have choose to do these in the past and now.

This time around I created standalones for each system as well just for each core. Would not use both just one or the other but you could use both if you wanted to but i see no point.

Example (Systems)

Sega Genesis
Super Nintendo
Turbo Grafx
Arcade
........

Example (Cores)

genesis_plus_gx
SNES9x_next
Mednafen_PCE-fast
fb_alpha
........

Important Notices:

1.) These are Unofficial Standalones Emulators. They are unofficial because they use the latest unofficial compile and then they are split up into standalones from the official setup.

2.) These Standalone Emulators are not multiMAN/mmCM Compatible. (Booting Roms from multiMAN will not work (official 0.9.7 does), Return to multiMAN does work). You can have this installed alongside the official installation as well.

New Cores Added from 0.9.7 Stanadlone

Menafen_VB (Nintendo Virtual Boy)
Mednafen_Neopop (Neo Geo Pocket / Color)
Mednafen_PSX (PSone -- Limited playabality runs at 18-25 FPS, can only improve with a dynarec)

Title ID's

Credits / Thanks

Squarepusher aka Twinaphex: for the PS3 port of RetroArch and the work he has done on this great emulator. Also for giving me the okay to release these standalones.
Pete_uk: for all his unofficial compiles of RetroArch.
Aldostools: for creating such a great tool set which makes this process very easy.

3.55 - 4.21 Download
* Standalone Cores (mediafire download folder)
OR
* Standalone Systems (mediafire download folder)

4.30 Download

* Standalone Cores (mediafire download folder)

For additional RetroArch Help and info Please checkout this thread. For help and infomation on the official versions of RetroArch visit http://www.libretro.org.

PSX-SCENE: The Pinnacle Scene Xenocracy

● Latest News ● Report News ● Search Forums ● Hall of Fame ●
● Facebook.com/PSXScene ● RSS ● Twitter.com/psx_scene ●

Share
- Share this post on
- Digg
- Del.icio.us
- Technorati
- Twitter

bropesda likes this.

Categories:

_{Tags :

0.9.8 beta 3,

lgba,

nes,

ps3,

retroarch,

retroarch standalones,

stlcardsws,

tg16}

21 Comments

bropesda - 12-07-2012, 12:14 PM
- Reply
nice one mate

Citrus - 12-07-2012, 12:44 PM
- Reply
No bSnes

peleep - 12-07-2012, 12:49 PM
- Reply
Can't see MAME or VICE?

mjp_82 - 12-07-2012, 06:15 PM
- Reply
help!!

PS3 FAT 60GB
CFW ROGERO CEX 4.30 v2

Error 80010017

FreakAlchemist - 12-07-2012, 09:49 PM
- Reply
The font shows up mega huge then it freezes.
I'm on rogero 4.30 v2.03

STLcardsWS - 12-07-2012, 10:12 PM
- Reply
The font shows up mega huge then it freezes.
I'm on rogero 4.30 v2.03

help!!

PS3 FAT 60GB
CFW ROGERO CEX 4.30 v2

Error 80010017

Hmm let me look into that.Will report back.. I may of goofed and used the the initial 0.9.8 Beta 3 release where that was an issue for Rogero 4.30 users. If that is the case i will have to use the latest one which i think i did but perhaps i got the installations mixed up on my HDD. i will look into and if i did they will work it just i have to correct the error in the cores and reupload. I probley will need a day max to get that cleared up My apologizes.

Can't see MAME or VICE?

Neither are supported in 0.9.8 Beta 3, vice has never been supported in RetroArch. And Imame4all was shortly in some 0.9.7 builds but dropped due to performance issues .was never really intended to be on the ps3 as it is an early version of mame 0.37b5. It was for other low performance system where RetroArch will run. For PS3 they are porting over MAME 0.78

No bSnes

Bsnes is very high demanding as it is a very accurate emulator. You will not see BSnes without a dynarec from what i hear.

boredofall - 12-08-2012, 10:35 AM
- Reply
I will always love the classics :P

mega4000 - 12-08-2012, 10:39 AM
- Reply
Still no stealth version.

STLcardsWS - 12-08-2012, 01:38 PM
- Reply
Still no stealth version.

this is not multiMAN comp. as mentioned above

Also you can expect every homebrew app to be "stealth".

Working on fixing the rogero issue, hopefully i have all new PKGs up tonight. My ISP is acting up going in and out since last night so no promises. but i promise the issue will be fixed.

Update:

CAN someone on Rogero 4.30 v2.03 please test this, it should work fine. just want to confirm before i proceed with rest of the cores.

LINK

(its the FCEUmm core (NES) )

mjp_82 - 12-08-2012, 09:02 PM
- Reply
Originally Posted by STLcardsWS

CAN someone on Rogero 4.30 v2.03 please test this, it should work fine. just want to confirm before i proceed with rest of the cores.

(its the FCEUmm core (NES) )

Not Working..

Same error 80010017

STLcardsWS - 12-08-2012, 11:14 PM
- Reply
hmm that's odd i will look into it more.

Did pete_uk's recent compile work for you? link

These came from that build.

pete_uk - 12-10-2012, 06:12 AM
- Reply
Originally Posted by STLcardsWS

hmm that's odd i will look into it more.

Did pete_uk's recent compile work for you? link

These came from that build.

I think that may be the old version, This is the link for 4.30 TEST_430.rar

Pete

STLcardsWS - 12-10-2012, 06:21 PM
- Reply
Oh i think i see my mistake ..

Thanks Pete.

Will get on these cores asap.

pete_uk - 12-11-2012, 06:58 AM
- Reply
Originally Posted by STLcardsWS

Oh i think i see my mistake ..

Thanks Pete.

Will get on these cores asap.

No problem There will only be one pkg next time

underball - 12-11-2012, 10:48 AM
- Reply
Is anyone ever going to fix the default ROM path problem? Because that shit is way more annoying than anything else.

Also - Sega CD Music audio working is great. But is there a reason it skips/Jumps every 30-40 seconds? IS there some kind of throttle setting issue that can be adjusted so the Sega CD audio is smooth? OR is it a RAM/clock speed issue in the PS3 that needs a better dynarec?

STLcardsWS - 12-15-2012, 12:11 PM
- Reply
Sorry Rogero 4.30 users. I have been busy the past week. soon be done soon

STLcardsWS - 12-26-2012, 11:33 PM
- Reply
Okay so i took awhile i know, was very busy the past few weeks.

However here is the Standalone cores for Rogero 4.30 users

Downloads via mediafire

Will do the systems soon or may wait until RetroArch 0.9.8 official release which is suppose to be soon.

brakk3n - 12-28-2012, 02:32 AM
- Reply
In other news Dolphin 3.5 (Nintendo Wii & Gamecube) emulator has been released for the PC after year in development.

deicidemilan - 12-29-2012, 01:17 PM
- Reply
thxxxxxxxxx

bryceone - 01-04-2013, 12:54 PM
- Reply
How do I get SegaCDs working? I have the system roms in RetroArch's system folder (according to the location in the CFG file), as well as in the SegaCD ISOs folder. Neither is working. I've also edited the CFG file to add to startup rom path but it keeps resetting it back to "/". Anyway to fix this?