About Kmeaw PSN Enabler & Disabler:
Here is a PSN enabler and disabler I've made which also spoofs to Firmware v4.20. This is only for Kmeaw users. I've made one for Rebug FW too but I haven't tested it yet. I have used Rebug's spoofer files and Nathanr's tools, so thanks to them. Make sure you are unspoofed (3.55) before running the enabler. The disabler restores the original Kmeaw files and returns to v3.55. I have also used a reactpsn compatible vsh.self in the disabler so it doesn't screw anybody up that uses reactpsn. For those that don't use reactpsn, you won't notice anyway.
To enable PSN and spoof to v4.20, run the enabler, the screen will go black for about 15 secs, PS3 will then restart, your pad will have disconnected too so press the PS button. You can now check your firmware version in system info, it should say 'version 4.20' and you should now be able to connect to PSN. To disable and return to v3.55, just run the disabler, screen goes black again and PS3 restarts.
I can't see this lasting long, as it looks like Sony are currently only checking the firmware version above and beyond what Rebug have already done.
PSN Spoof Enabler [4.20] [KMEAW].pkg
PSN Spoof Disabler [3.55] [KMEAW].pkg
About Rebug PSN Enabler:
As promised a couple days ago, here is a PSN enabler for Rebug FW. I found the best and safest way to do this was not to create separate packages like for the Kmeaw version, but to modify the 'Rebug 0.7 Update Package' then use Rebug's own CEX/DEX Selector. You must already be using Rebug FW 3.55.2 to use this. If you have already installed Rebug's Official Update 0.7 before, you can still install this.
Before you install this package, make sure you are in 'normal' mode (3.55). If you are already spoofed to 4.11 (rebug mode), use Rebug's CEX/DEX selector to change back to 3.55. Do this by pressing 'L1 + Cross(X)' within the selector. Status should say 'Normal Mode'. Exit selector and check system FW is 3.55.
Now install the 'Rebug_PSN_UPDATE_0.7r2_3.55.2.pkg' from the link below. If you get the message 'same version already installed, continue' select 'YES'.
Now run 'Rebug Unofficial PSN Update Package 0.7r2 (3.55.2)' from XMB. Select 'YES'. You will get message 'Update Complete - System Will Reboot'.
After reboot, go back into Rebug's CEX/DEX selector. Press 'L1 + Circle(O)' to activate Rebug mode. Press 'PS' button and exit the selector. System will reboot. Now check in system settings/info that your firmware version says 'version 4.20'. If it does, you have done the above procedure correctly and you can now log in to PSN.
Enjoy it while it lasts.
Rebug PSN Enabler + Spoof 4.20 Update Package 0.7r2.pkg
Note: this is for Rebug Firmware 3.55.2 only. If you need the Kmeaw version, I posted it a here few days ago.
Kmeaw Version Link -
LIKE/VOTE for this Entry in this month's Contest!