RetroArch PS3 Developer Squarepusher aka TwinAphex has released a new version of RetroArch (v0.9.8.1). This new version fixes many of the bugs present in the 0.9.8 last week. The following cores have fixes you can see below in the change log: FBA, Nestopia, FCEUmm, Mednafen PC Engine, Mednafen WonderSwan, Genesis Plus GX.. Plus a serious bug was corrected where you could get stuck or the app would hang while toggling on various menus. Also there was an addition in this release. That allows you change the "Menu Skins" in "Retro Settings". Included is a skin created by CaptainCPS-X. Also, I myself have created a few menu skins you can download below.
PS3 Change Log:
RETROARCH CONSOLE
------------------------------------------------------------------------------
v0.9.8.1
------------------------------------------------------------------------------
- [FBA] Fixed serious bug that would cause a lot of games to get stuck in service mode or to display graphical corruption (CPS1).
- [NEStopia] Now outputs in mono sound mode.
- [FCEUmm] Uses RGB565 now - should no longer flicker on RMenu.
- [Mednafen PC Engine Fast] Fixed libretro issue where certain games had totally wrong pitch
- [Mednafen Wonderswan] Core fixed, works again.
- [Genesis Plus GX] Set audio samplerate at 48KHz (from 44KHz).
- [PS3] Fixed serious bugs where it could get 'stuck' or the app could 'hang' while toggling between ingame and quickmenu/file browser.
- [PS3] Added 'Menu Skins' to 'Retro Settings' - will allow you to select a different background for the menu. Captain CPS-X's menu skin is also included.
------------------------------------------------------------------------------
v0.9.8
------------------------------------------------------------------------------
- (Android) Initial release of RetroArch Android.
- [LIBRETRO] Added Mednafen NGP and Mednafen VB.
- [LIBRETRO] Added NEStopia Undead (1.44).
- [LIBRETRO] Updated Mednafen PCE Fast and Mednafen Wonderswan to 0.9.28.
- [LIBRETRO] Added PCSX ReARMed for RetroArch Android.
- [FBA] Updated Final Burn Alpha to 0.9.27.28.
- [Gambatte] Updated Gambatte (now has built-in GBC BIOS color palettes).
- [SNES9x Next] Updated SNES9x Next (fixes numerous bugs).
- [FCEUmm] Updated FCEUmm to latest version.
- [Genesis Plus GX] Updated Genesis Plus GX to latest version.
- (360) Gamma correction can now be applied on-the-fly - no longer requires
reboots
- (360) Added new shaders - mudlord-oldtvshader-variant, crt-curved, and
others
- (360) Added 'SRAM dir Enable' option - allows you to save all your SRAM to
game:/sram instead of the ROM directory
- (360) Added 'SRAM dir Enable' option - allows you to save all your states to
game:/savestates
- (RARCH_CONSOLE) Various stability fixes
- (RARCH_CONSOLE) More sane unzipping mode - will temporarily extract file to
HDD and then instantly delete it when it's done with it (ie. when another ROM
gets loaded or when RetroArch shuts down)
- (RARCH_CONSOLE) All console ports now use 59.94Hz for synchronization on
the RetroArch side instead of 59.92Hz as before. All consoles use 59.94Hz
so this agrees better with them.
- (PS3) Added PAL60 temporal PAL mode
- (PS3) Fixed a lot of path issues - SRAM/savestate dir enable now work,
'Default ROM directory' should now work, etc.
- (PS3) Added rewind granularity options
- (PS3) Rewrote video driver from scratch (RGL v2). Faster blitting.
- (PS3) Onscreen keyboard should work again.
- (WII) Made a custom wiiuse input driver and built it in. Slimmed down
and should give better results. Also rejigged input in general.
- (WII) Added rewind option. NOTE: This feature is CPU intensive - a core
might need to at least run at double realtime FPS in order for this option
to be useful.
- (WII) Button combos can now be done ingame. You can do rewinding, fast
forwarding, selecting save state slots and 'save state load/save state save'
all ingame without first going to the menu. For more information, read the
README.txt for the Wii release.
------------------------------------------------------------------------------
v0.9.7.1
------------------------------------------------------------------------------
- (FBAcores CPS1) Sound crackling/popping fixed
- (FBACores CPS2) Sound crackling/popping fixed
- (FBACores NeoGeo) Sound crackling/popping fixed
- (WII) Fixed left/right audio channels being in reverse issue
- (WII) Filebrowser now filters by core supported extensions
- (WII) Fixed filebrowser performance issues in v0.9.7
------------------------------------------------------------------------------
v0.9.7
------------------------------------------------------------------------------
- (XBOX 1/Wii) Made an Xbox 1/Wii port.
- (LIBRETRO) Added Mednafen PCE FAST, and Mednafen Wonderswan cores
- (360) Added Genesis Plus GX to official 360 release
- (Genesis Plus GX) Updated to v1.7.0
- (PS3) Improved GUI
- (360) Improved UI
- (ALL) Improved stability / error trapping
- (ALL) ZIP extract modes expanded - it can extract the contents of a ZIP file to
the current directory, and/or extract to current dir and immediately load the
first ROM/game file.
- Too many things to mention
------------------------------------------------------------------------------
v0.9.6
------------------------------------------------------------------------------
- (PS3/360) Initial release of RetroArch PS3/360.
------------------------------------------------------------------------------
v0.9.8.1
------------------------------------------------------------------------------
- [FBA] Fixed serious bug that would cause a lot of games to get stuck in service mode or to display graphical corruption (CPS1).
- [NEStopia] Now outputs in mono sound mode.
- [FCEUmm] Uses RGB565 now - should no longer flicker on RMenu.
- [Mednafen PC Engine Fast] Fixed libretro issue where certain games had totally wrong pitch
- [Mednafen Wonderswan] Core fixed, works again.
- [Genesis Plus GX] Set audio samplerate at 48KHz (from 44KHz).
- [PS3] Fixed serious bugs where it could get 'stuck' or the app could 'hang' while toggling between ingame and quickmenu/file browser.
- [PS3] Added 'Menu Skins' to 'Retro Settings' - will allow you to select a different background for the menu. Captain CPS-X's menu skin is also included.
Past Change Logs
------------------------------------------------------------------------------
v0.9.8
------------------------------------------------------------------------------
- (Android) Initial release of RetroArch Android.
- [LIBRETRO] Added Mednafen NGP and Mednafen VB.
- [LIBRETRO] Added NEStopia Undead (1.44).
- [LIBRETRO] Updated Mednafen PCE Fast and Mednafen Wonderswan to 0.9.28.
- [LIBRETRO] Added PCSX ReARMed for RetroArch Android.
- [FBA] Updated Final Burn Alpha to 0.9.27.28.
- [Gambatte] Updated Gambatte (now has built-in GBC BIOS color palettes).
- [SNES9x Next] Updated SNES9x Next (fixes numerous bugs).
- [FCEUmm] Updated FCEUmm to latest version.
- [Genesis Plus GX] Updated Genesis Plus GX to latest version.
- (360) Gamma correction can now be applied on-the-fly - no longer requires
reboots
- (360) Added new shaders - mudlord-oldtvshader-variant, crt-curved, and
others
- (360) Added 'SRAM dir Enable' option - allows you to save all your SRAM to
game:/sram instead of the ROM directory
- (360) Added 'SRAM dir Enable' option - allows you to save all your states to
game:/savestates
- (RARCH_CONSOLE) Various stability fixes
- (RARCH_CONSOLE) More sane unzipping mode - will temporarily extract file to
HDD and then instantly delete it when it's done with it (ie. when another ROM
gets loaded or when RetroArch shuts down)
- (RARCH_CONSOLE) All console ports now use 59.94Hz for synchronization on
the RetroArch side instead of 59.92Hz as before. All consoles use 59.94Hz
so this agrees better with them.
- (PS3) Added PAL60 temporal PAL mode
- (PS3) Fixed a lot of path issues - SRAM/savestate dir enable now work,
'Default ROM directory' should now work, etc.
- (PS3) Added rewind granularity options
- (PS3) Rewrote video driver from scratch (RGL v2). Faster blitting.
- (PS3) Onscreen keyboard should work again.
- (WII) Made a custom wiiuse input driver and built it in. Slimmed down
and should give better results. Also rejigged input in general.
- (WII) Added rewind option. NOTE: This feature is CPU intensive - a core
might need to at least run at double realtime FPS in order for this option
to be useful.
- (WII) Button combos can now be done ingame. You can do rewinding, fast
forwarding, selecting save state slots and 'save state load/save state save'
all ingame without first going to the menu. For more information, read the
README.txt for the Wii release.
------------------------------------------------------------------------------
v0.9.7.1
------------------------------------------------------------------------------
- (FBAcores CPS1) Sound crackling/popping fixed
- (FBACores CPS2) Sound crackling/popping fixed
- (FBACores NeoGeo) Sound crackling/popping fixed
- (WII) Fixed left/right audio channels being in reverse issue
- (WII) Filebrowser now filters by core supported extensions
- (WII) Fixed filebrowser performance issues in v0.9.7
------------------------------------------------------------------------------
v0.9.7
------------------------------------------------------------------------------
- (XBOX 1/Wii) Made an Xbox 1/Wii port.
- (LIBRETRO) Added Mednafen PCE FAST, and Mednafen Wonderswan cores
- (360) Added Genesis Plus GX to official 360 release
- (Genesis Plus GX) Updated to v1.7.0
- (PS3) Improved GUI
- (360) Improved UI
- (ALL) Improved stability / error trapping
- (ALL) ZIP extract modes expanded - it can extract the contents of a ZIP file to
the current directory, and/or extract to current dir and immediately load the
first ROM/game file.
- Too many things to mention
------------------------------------------------------------------------------
v0.9.6
------------------------------------------------------------------------------
- (PS3/360) Initial release of RetroArch PS3/360.
RetroArch 0.9.8.1 README File --- Important Info Click Spoiler
RETROARCH 0.9.8.1 README FILE
------------------------------------------------------------------------------
RETROARCH PS3 - 0.9.8.1
------------------------------------------------------------------------------
RetroConsole Level: 2
Author: Themaister, Squarepusher/Twin Aphex
------------------------------------------------------------------------------
------------------------------------------------------------------------------
HOW TO INSTALL THIS
------------------------------------------------------------------------------
------------------------------------------------------------------------------
ON DEBUG (DEX) PS3
------------------------------------------------------------------------------
Put the PKG file 'retroarch-ps3-v0.9.8.1-dex.pkg' on your
USB stick, put it in your PS3. Go to the PS3 XMB - go to the
Game tab - Select 'Install Packages', and install the PKG file.
------------------------------------------------------------------------------
ON CFW P3
------------------------------------------------------------------------------
Put the PKG file 'retroarch-ps3-v0.9.8.1-cfw.pkg' on your
USB stick. Put it in your CFW PS3. Go to the PS3 XMB - go to the
Game tab - select 'Install Packages', and install the PKG file.
NOTE: The official release no longer supports Geohot/Wutangzra
CFWs. If you must use them, you have to do pkg_finalize on the PKG
to install it.
------------------------------------------------------------------------------
HOW TO USE THIS
------------------------------------------------------------------------------
On first startup, RetroArch will select one of the dozen or
so emulator/game cores. The name of the core currently loaded will
be shown at the top side of the screen.
You can now select a ROM that this core supports and load it in
the Filebrowser.
To select a different core in the menu - press Select to go to the
Settings screen. From here, go to the 'Retro tab', and select
'Default emulator core'. Press X to go to a filebrowser where you
can select a different core. Press X to confirm, then exit
RetroArch. Start up again to boot up to the new emulator core.
To change to a different core ingame - press R3 to bring up
the 'Quick Menu'. Select 'Change libretro core'. Press X to
go to a filebrowser where you can select a different core.
------------------------------------------------------------------------------
INGAME CONTROLS
------------------------------------------------------------------------------
During ingame operation you can do some extra actions:
Right Thumb Stick - Down - Fast-forwards the game
Right Thumb Stick - Up - Rewinds the game in real-time
('Rewind' has to be enabled in the
'Settings' menu - warning - comes at a
performance decrease but will be worth it
if you love this feature)
RStick Left + R2 - Decrease save state slot
Rtick Right + R2 - Increase save state slot
RStick Up + R2 - Load selected save state slot
RStick Down + R2 - Save selected save state slot
L3 + R3 - Go back to 'Menu'/'Quick Menu'
------------------------------------------------------------------------------
WHAT IS RETROARCH?
------------------------------------------------------------------------------
RetroArch is a modular multi-system emulator system that is
designed to be fast, lightweight and portable. It has features
few other emulator frontends have, such as real-time rewinding
and game-aware shading.
------------------------------------------------------------------------------
WHAT IS LIBRETRO?
------------------------------------------------------------------------------
Libretro is the API that RetroArch uses. It makes it easy to
port games and emulators to a single core backend, such as
RetroArch.
For the user, this means - more ports to play with, more
crossplatform portability, less worrying about developers having
to reinvent the wheel writing boilerplate UI/port code - so that
they can get busy with writing the emulator/porting the emulator/game.
------------------------------------------------------------------------------
WHAT'S THE BIG DEAL?
------------------------------------------------------------------------------
Right now it's unique in that it runs the same emulator cores on
multiple systems (such as Xbox 360, PS3, PC, Wii, Xbox 1, etc).
For each emulator 'core', RetroArch makes use of a library API that
we like to call 'libretro'.
Think of libretro as an interface for emulator and game ports. You
can make a libretro port once and expect the same code to run on all
the platforms that RetroArch supports. It's designed with simplicity
and ease of use in mind so that the porter can worry about the port
at hand instead of having to wrestle with an obfuscatory API.
The purpose of libretro is to help ease the work of the emulator/game
porter by giving him an API that allows him to target multiple
platforms at once without having to redo any code. He doesn't have
to worry about writing input/video/audio drivers - all of that is
supplied to him by RetroArch. All he has to do is to have the emulator
port hook into the libretro API and that's it - we take care of the rest.
------------------------------------------------------------------------------
PLAYSTATION3 PORT
------------------------------------------------------------------------------
The PS3 port of RetroArch is one of the most developed console ports
of RetroArch.
A couple of unique features RetroArch PS3 boasts that is not commonly
found anywhere else:
- Game-aware shading in every emulator now (*)
- Real-time rewinding
- More shader features (motion blurring, etc)
- Switching between emulator cores seamlessly, and ability to install new
libretro cores
Included with RetroArch PS3 are a bunch of shaders - including the
latest versions of the popular xBR shader. It is possible to use two
shaders simultaneously to get the best possible graphical look.
* Check out Opium2k's manual shaders for Zelda 3 and others - you can
find DLC packs for RetroArch at this site:
https://code.google.com/p/retro-arch/
------------------------------------------------------------------------------
EMULATOR/GAME CORES BUNDLED WITH PS3 PORT
------------------------------------------------------------------------------
The following emulators have been ported to RetroArch and are included
in the PS3 release of RetroArch.
For more information about them, see the included
'retroarch-libretro-README.txt' file.
- Final Burn Alpha (Arcade - various) [version 0.2.97.28]
- FCEUmm (Nintendo Entertainment System) [recent SVN version]
- NEStopia (Nintendo Entertainment System) [1.44]
- Gambatte (Game Boy | Super Game Boy | Game Boy Color) [version 0.5.0 WIP]
- Genesis Plus GX (Sega SG-1000 | Master System | Game Gear | Genesis/Mega Drive |
Sega CD) [version 1.7.3]
- SNES9x Next (Super Nintendo/Super Famicom)
- VBA Next (Game Boy Advance)
- Prboom (for playing Doom 1/Doom 2/Ultimate Doom/Final Doom)
- Mednafen PCE Fast (PC Engine/PC Engine CD/Turbografx 16)
- Mednafen Wonderswan (WonderSwan/WonderSwan Color/WonderSwan Crystal)
- Mednafen NGP (Neo Geo Pocket Color)
- Mednafen VB (Virtual Boy)
All of the emulators listed above are the latest versions currently
available. Most of them have been specifically optimized so that they
will run better on PS3 (some games would not reach fullspeed without these optimizations).
------------------------------------------------------------------------------
WHAT EXTENSIONS ARE SUPPORTED BY EACH CORE
------------------------------------------------------------------------------
- Prboom WAD|wad
- SNES9x Next smc|fig|sfc|gd3|gd7|dx2|bsx|swc|zip|SMC|FIG|SFC|BSX|GD3|
GD7|DX2|SWC
- Genesis Plus GX md|smd|bin|gen|zip|MD|SMD|bin|GEN|ZIP|sms|SMS|gg|GG|sg|SG|
cue|CUE
- VBA Next GBA|gba
- FCEUmm nes|NES|unif|UNIF
- NEStopia nes|NES|fds|FDS
- Gambatte gb|gbc|dmg|zip|GB|GBC|DMG|ZIP
- Final Burn Alpha zip|ZIP
- Mednafen PCE pce|PCE|cue|CUE
- Mednafen Wonderswan ws|WS|wsc|WSC
- Mednafen NGP ngp|NGP
- Mednafen VB vb|VB
------------------------------------------------------------------------------
ZIP SUPPORT
------------------------------------------------------------------------------
Selecting a ZIP file will temporarily unzip that file to the harddrive. The
temporary file will be deleted as soon as the game gets unloaded and/or when
you quit RetroArch.
NOTE: For the FBA core (and other cores that have 'block_extract' set to
true) - selecting a ZIP file from the Filebrowser will load that game
directly.
------------------------------------------------------------------------------
Troubleshooting
------------------------------------------------------------------------------
If you find that RetroArch no longer works for whatever reason, there is
a way to get it back to work -
- Remove retroarch.cfg from the 'SSNE100000' folder, then start up again.
The Libretro management service in RetroArch should automatically pick a
random libretro core and write this to the config file.
------------------------------------------------------------------------------
What can you expect in the future?
------------------------------------------------------------------------------
- Do a Blackberry Playbook/Blackberry 10 RetroArch port
- Do an iOS port of RetroArch (will need hardware for this - gifts appreciated)
- Make the libxenon port release-worthy.
- Add console-friendly features (nicely formatted names for FBA, some better
way to do core switching, etc)
- Fix NxEngine issues on consoles
- Finish up MAME 0.72 port
- Finish up ScummVM port
- Port of VICE to libretro
- More emulators, more games that will run on RetroArch
- Lots of other crazy ideas that might or might not pan out
------------------------------------------------------------------------------
Credits
------------------------------------------------------------------------------
- Mudlord for his Waterpaint/Noise shaders.
- Hyllian for the xBR shader.
- Opium2k for the nice manual shaders (bundled with PS3 release).
- Deank for assistance with RetroArch Salamander on CFW PS3s and
Multiman interoperability.
- FBA devs for adopting the libretro port.
- Ekeeke for help with the Genesis Plus GX port.
- ToadKing for having done a lot of work on RetroArch Wii.
- Freakdave for helping out with the Xbox 1 port.
------------------------------------------------------------------------------
Websites
------------------------------------------------------------------------------
Twitter: http://twitter.com/libretro
Source: http://github.com/libretro
Homepage: RetroArch - multi-system frontend for libretro
Opium2K DLC for RetroArch: https://code.google.com/p/retro-arch/
IRC: #retroarch (freenode)
------------------------------------------------------------------------------
Additional Main Menu Skins
by STLcardsWS
by STLcardsWS
Main Menu Skins
Download DEX 3.55: RetroArch 0.9.8.1 (AnonFiles)
Download CEX 3.40-4.XX: RetroArch 0.9.8.1 (AnonFiles-- Resigned by pete_uk)
Source: Xbins & Libretro Twitter
Twitter: http://twitter.com/libretro
Source: http://github.com/libretro
Homepage: RetroArch - multi-system frontend for libretro
Opium2K DLC for RetroArch: https://code.google.com/p/retro-arch/
IRC: #retroarch (freenode)
PSX-SCENE: The Pinnacle Scene Xenocracy
● Latest News ● Report News ● Search Forums ● Hall of Fame ●
● Facebook.com/PSXScene ● RSS ● Twitter.com/psx_scene ●
Daily Digest
Recent Threads
Recent Comments
vBulletin Message