PSX-SCENE Forum Discussion for Sony PlayStation/PsOne/PS2/PS3/PSP/PS VITA
  • [UPDATE#4] Rogero CEX-4.21 CFW & LV0 Keys Released

    Update #4 Rogero has released version 1.09 of his 4.21 CFW. please check the MD5 before installing you can do so with this App. LINK. See below under UPDATE #4 for all the download links and information from upgrading to V1.00 to 1.09 .

    This update has fixed many of the bricking issues in the previous v1.00 release. As with any CFW installation do your research if you are someone without a hardware flasher. Also be sure to checkout Rogero official release thread @ tortuga-cove before installing to make sure no information posted below has changed in update #4.







    PS3 Developer Rogero known for his other CFW (such as no-check Downgradable FWs) & Backup Manager. Has made use of the recent lv0 keys that have been leaked an released. Soon after Bluedisk CFW was cracked the lv0 keys for 4.21 were leaked in the wild. So that paved the way for new CFW.



    Rogero CFW can only be installed on a PS3 running 3.55

    v1.00 changes
    • This is a 4.21CFW spoofed to version 4.25 to allow SEN access

    • It can be used as a normal System Update from any 3.55 OFW/CFW/MFW

    • It was tested using a hardware flasher and no bricks or any problems at all were encountered

    • It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed

    • Games must be loaded from Disc Icon (with Original game in BD) and not from app_home

    • Current 3.55 homebrew application can't be loaded on this CFW, applications must be re-signed properly.

    • Downgrading back to 3.55 is always possible using hardware flashers and will be tested soon using software methods.


    UPDATE #1
    (New/Updated Info in Blue)
    Source: Tortuga-Cove

    ATTENTION:

    1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

    2- Always make a NOR/Nand dump using multiMAN or memdump before installing this CFW to have a recovery backup in case of any bricks.Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.
    ** A Hardware Flasher alone without a valid dump cannot fix your bricked PS3 **


    3- It's always better to have QA flag set (leave it Enabled) on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg


    4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

    5- TrueBlue CFW users must update back to OFW3.55 before installing this CFW to avoid possible bricks.


    **Credits to eussNL and the PS3DevWiki for the valuable and always up-to-date source of information.
    **Credits to Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.
    Update #2
    Source: Tortuga-Cove

    Downgrading back to 3.55 is always possible using the following steps :

    • Download the 4.25 downgrader PUP ---> 4.25 Downgrader Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db

    • Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"

    • While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.


    • Start the PS3 into Recovery Menu (or use Condor Updater for Slim consoles) and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)

    • Once the install is finished, you're now back on Rogero CFW3.55 v3.7 ( from here it's better to dehash again before installing any other OFW/CFW 3.55 )
    Update #3
    Source: Tortuga-Cove



    After Testing with some bricked Slim consoles ( from updating to CFW4.21 ) with different friends and testers around the world,
    I can confirm that Bricked consoles can be recovered back to CFW3.55 even if you didn't have a NOR Dump/Backup .


    Requirements are:
    1- a Hardware Flasher so you can read/write to the PS3 NOR flash
    2- A Dongle with PSgrade payload (any old jailbreak dongle + PSGrade hex will do) used to Enter Factory Service Mode (FSM)
    3- Rogero CEX3.55 v3.7 PUP

    for more details about Recovering from the Brick please check this new thread ----> Brick-Recovery Procedure from CFW4.21 back to CFW3.55

    Note:
    - I didn't receive any Brick report from any FAT PS3 that updated to CFW4.21, so it seems FAT consoles are not being affected by the bug.

    - Apparently only the last downgradable Slim models are affected (CECH-25xx with Datecode 1A and base FW version = 3.50)

    - I Also know that there are also few Slims that bricked with model CECH-20xx but 90% of the reports were model
    (CECH-25xx with Datecode 1A and base FW version = 3.50).

    - The Brick may be caused by the boot-loaders not being written correctly into the NOR during the Update process.

    Please note also that all the above info may not be 100% accurate,
    things are still being worked on so nothing is confirmed at all and I don't promise anything about an updated CFW.

    -RogerO


    Update #4
    Source: Tortuga-Cove



    Rogero CEX-4.21 CFW v1.09 Free for All


    update ---> Rogero CEX-4.21 v1.09

    mirror --->
    Rogero CEX-4.21 v1.09

    MD5:
    e777351e788a7eb4007a2280abca7fbd


    Size:
    192 MB (201,329,483 bytes)


    For details about Updating from CFW4.21 v1.00 to CFW4.21 v1.09 please read the Update Guide below



    For details about Recovering from v1.00 Brick please check this thread
    ----> Brick-Recovery Procedure from CFW4.21 back to CFW3.55

    v1.09 Details and Changes

    - Compatibility problem with some Slim models (CECH-25xx) is now fully fixed.
    - XMB Icons problem from in-game PS button is now fixed.
    - Loading games from App_home Icon is now fixed.
    - Many other fixes from version 1.00 for a better performance and added stability.
    - It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
    - It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
    - Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
    - Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.

    Updating from CFW4.21 v1.00 to the CFW4.21 v1.09 should be done using the following steps :


    1- Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )
    ---- Downgrade back to ver3.55 using the guide above.
    ---- Once on Rogero CEX3.55 v3.7 you can update again from Recovery Menu into the new CFW4.21 v1.09

    2- Alternative Way ( CFW4.21 v1.00 --> Recovery Menu --> CFW4.21 v1.09 )
    ---- You can try updating from CFW4.21 v1.00 to CFW4.21 v1.09 from Recovery Mode first.
    ---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )





    Rogero CEX-4.21 CFW v1.09 Free for All
    Official Download Link: Rogero CEX 4.21 CFW
    MD5: e777351e788a7eb4007a2280abca7fbd
    Size: 192 MB (201,329,483 bytes)
    Mirror #1 MultiUpload


    Update:
    multiMAN 04.08.00 is Rogero 4.21 CFW compatible
    Here is CFW 4.21 Eboot Resigner


    Source of KEYS: ps3crunch.net
    Source of Rogero CFW: Tortuga-Cove


    Thanks to thenat17 & randomstuff for the member submissions of this great news.

    PSX-SCENE: The Pinnacle Scene Xenocracy
    Comments 1376 Comments
    1. herculestec's Avatar
      herculestec -
      [QUOTE=Sandbug;1010693][QUOTE=herculestec;1010683] I decided to follow the tutorial first install via the XMB 4.25 downgrader PUP, checked the MD5 perfect, usually installed, when you restart the ps3, I see the definitions of systems and was 4.21, found strange in a way, aew went to the second part of the tutorial is to install Rogero-CEX 3.55 CFW v3.7, rebooted my ps3 in recovery mode as the tutorial boss, to my surprise and asked for a firmware 4.40 or later why is that

      Did you or did you not toggle QA after installing downgrader?
      What This? QA?
    1. Sandbug's Avatar
      Sandbug -
      [QUOTE=herculestec;1010702][QUOTE=Sandbug;1010693]
      Quote Originally Posted by herculestec View Post
      I decided to follow the tutorial first install via the XMB 4.25 downgrader PUP, checked the MD5 perfect, usually installed, when you restart the ps3, I see the definitions of systems and was 4.21, found strange in a way, aew went to the second part of the tutorial is to install Rogero-CEX 3.55 CFW v3.7, rebooted my ps3 in recovery mode as the tutorial boss, to my surprise and asked for a firmware 4.40 or later why is that

      What This? QA?
      That's a "no, I didn't" then and that's why you can't downgrade. Go read the tutorial once more.
    1. Shaitan's Avatar
      Shaitan -
      Quote Originally Posted by migoto View Post
      Should I flash? Mine's CECH-2006A bought in 2009. Factory firmware at 3.41.
      After installing the 4.25 downgrader PUP it's normal for the ps3 to ask for 4.40 or later when you go into recovery, you should be able to still use the Rogero 3.7 PUP in recovery even though it says 4.40. Have you tried installing it anyway, if you do and still get an error post the error
    1. jackson60's Avatar
      jackson60 -
      Quote Originally Posted by jerickid View Post
      I'm afraid that I don't know . Because my original PS3 YLOD'd and this is just a 2nd hand fat and hacked-ready ps3 that I bought off the internet .
      okay tell what model your ps3 is maybe i can help u cuz i have ps3 fat and slim
    1. herculestec's Avatar
      herculestec -
      [QUOTE=Sandbug;1010703][QUOTE=herculestec;1010702]
      Quote Originally Posted by Sandbug View Post

      That's a "no, I didn't" then and that's why you can't downgrade. Go read the tutorial once more.
      what I did wrong friend? screwed with unlocking my ps3? or hopeless, please not only that I am with this problem, if you know how to help please ...
    1. Xellos's Avatar
      Xellos -
      ok... how long is it suppose to take to toggle QA? I just install the pkg and run it and it is been black screen for a while
    1. JOshISPoser's Avatar
      JOshISPoser -
      Quote Originally Posted by JOshISPoser View Post
      well, couple questions from me, otherwise i am upgrading.

      so, is this gonna be the standard firmware? i don't wanna lose constant support on showtime since my files need it.
      also, is qa flagging really necessary? i mean, i don't have a flasher and i know it's a precaution, but i feel if i brick, qa flag might not help.

      anyways, thanks for any help given. i just mostly want homebrew support to continue and i guess i'm willing to patch to 4.21, but i'd rather know if devs are gonna make this standard or not.
      oh, and how are psn games that are patched? i can't remember the verdict on if they worked or not.
    1. wartutor's Avatar
      wartutor -
      damn man they should really of started a new thread for this cfw...55 pages now and i don't know where the old comments started and the new ones begin..anyone know what page i should start reading on???
    1. jackson60's Avatar
      jackson60 -
      Quote Originally Posted by jerickid View Post
      So basically if I am already on cfw 3.55 then I dont need any flasher ? Can you help me update mine ? Im just new at this ps3 scene and pretty much clueless .
      okay that good since ur on 3.55 cfw so you want to install the Rogero CFW 4.21 or eles let me now
    1. junior4440's Avatar
      junior4440 -
      People with the 4.40 update problem that used the 4.25 to 3.55 downgrader make sure u install toggle qa and it is set and if Rogero's 3.55 cfw dont work just use OFW 3.55!! work just fine for me.
    1. Xellos's Avatar
      Xellos -
      How long does it take to QA? I just install the the pkg and run it and it is been black screen for a few minutes
    1. wartutor's Avatar
      wartutor -
      edit sorry double post
    1. abbadon7's Avatar
      abbadon7 -
      Hi i installed the v1 rogero 4.21 cfw with no problems at all & all games where working fine. Since the New version has came out i have downgraded & installed it perfect but i am having BIG problems. None of thegames on my hard drive will load they all try but then throw me back to the dash??? anyone else having this issue or know how i can resolve it
    1. jackson60's Avatar
      jackson60 -
      Quote Originally Posted by junior4440 View Post
      People with the 4.40 update problem make sure u install toggle qa and it is set and if Rogero's 3.55 cfw dont work just use OFW 3.55!! work just fine for me.
      actually there aonther way to fix that problem 4.40 i test it my self more than twice if u stuck on Rogero 4.21 u can use PUP called 4.25 CFW to 3.55 CFW
    1. jerickid's Avatar
      jerickid -
      Quote Originally Posted by junior4440 View Post
      People with the 4.40 update problem make sure u install toggle qa and it is set and if Rogero's 3.55 cfw dont work just use OFW 3.55!! work just fine for me.
      Yes please , help me . I don't know where to start .
    1. Sandbug's Avatar
      Sandbug -
      Quote Originally Posted by herculestec View Post
      what I did wrong friend? screwed with unlocking my ps3? or hopeless, please not only that I am with this problem, if you know how to help please ...
      Don't panic, it's not bricked or screwed up. I have not tried the downgrading process myself, but as I've understood the process is simple:
      1) install the downgrader from XMB
      2) install toggle_qa and run it
      3) boot to recovery mode and install Rogero CEX-3.55 CFW V3.7. If it says it wants 4.40 firmware just ignore the error.

      If #3 doesn't work then try installing Rogero CEX-3.55 CFW V3.7 from XMB instead and ignore the error.
    1. jackson60's Avatar
      jackson60 -
      Quote Originally Posted by abbadon7 View Post
      Hi i installed the v1 rogero 4.21 cfw with no problems at all & all games where working fine. Since the New version has came out i have downgraded & installed it perfect but i am having BIG problems. None of thegames on my hard drive will load they all try but then throw me back to the dash??? anyone else having this issue or know how i can resolve it
      no never seen that problem before i test my own games and it work very good

      but if u want to fix the problem u gonna have to go back to 3.55 CFW again do u have any tools that helps u with ur system?
    1. Thomas Servo's Avatar
      Thomas Servo -
      First, I just want to say a HUMONGOUS THANK YOU to Rogero for all his very hard work on getting this new CFW out to everyone...and *FREE*...none of this TB crap. I've been lurking around here for quite a while but now have a question...which I definitely have not seen answered as of yet (and I've read all the 1000+comments )

      With the latest and greatest v9, what happens if your HD dies and you have to replace it, with a slim PS3?

      From what I read, when some people were on v1, and tried swapping out their drive, or reformatting, it caused issues because they could only load a newer FW, which forced them to OFW.

      Can anyone shed any light on this? I'm currently on 3.55 KMEAW and want to upgrade, but want to make sure I will be safe down the road.

      Thanks!
    1. wizpsycho's Avatar
      wizpsycho -
      Quote Originally Posted by Sandbug View Post
      Don't panic, it's not bricked or screwed up. I have not tried the downgrading process myself, but as I've understood the process is simple:
      1) install the downgrader from XMB
      2) install toggle_qa and run it
      3) boot to recovery mode and install Rogero CEX-3.55 CFW V3.7. If it says it wants 4.40 firmware just ignore the error.

      If #3 doesn't work then try installing Rogero CEX-3.55 CFW V3.7 from XMB instead and ignore the error.
      Where i can download toggle_qa i have the same problem ..
    1. Sandbug's Avatar
      Sandbug -
      Quote Originally Posted by wizpsycho View Post
      Where i can download toggle_qa i have the same problem ..
      You might want to scroll all the way up where the links are..