CC V1.1 don`t work in Slimline V12

[pele]

Hi guys

Have solder in a CC V1.1 in V12 PAL slimline machine, did try to update the FW to 1.8 did not work. Flashed V1.5 hacked FW but when i put in a backup or ps2 original game i get to the browser and if i press so it would start it goes back to the browser.. :banghead: :banghead:

Have done a new install on the same machine same thing again whit a brand new CC and new cables....

Hope you guys have som tip or hints to give me....

BR

[easte24]

before you but the silver cover back on, plug up the console and while looking at the chip hit reset and see what the green led does and let me know

[pele]

Have tryed this out now, when hit power the green led lights up on the chip then down again.


before you but the silver cover back on, plug up the console and while looking at the chip hit reset and see what the green led does and let me know

[easte24]

do you have a laser fix installed

[pele]

The laser fix (MFD Fix) is installed.

[pele]

Did get the bugger to work...

Did burn a new FW cd to flash with...( The old disk works in other machines )

Flashed FW 1.8 to CC V1.1 and now it works...

So this is what i know...

Ps2 SlimeLine Pal machine.

1. FW 1.5 ---> CC 1.1 = Not Working
2. FW 1.8 ---> CC 1.1 = Working

[easte24]

glad you got it working

[pele]

Me to :dance: :dance: