The Unofficial CC1.1 V15 Diagram

[spedmetal]

With the help of easte24 (http://www.ps2-scene.org/forums/member.php?userid=31431) from www.xmodds.com we were able to confirm that the CC1.1 is working in the V15. The following is a unofficial diagram that I worked up for those that might be needing it.

EDIT: Oh by the way this is for the NTSC/UC version V15 SCPH-75001 GH-036-51

[N£TM£ÇH]

good job boys.. I can't figure out why sony has to keep releasing new boards one after the other. Thread stuck for awhile.. at least until v16 comes out :banghead:

[Knighty]

official diagram has just been released by crystal team on their homepage :)

[screenspinner]

is there already v15 out? :D
does anyone know the NTSC model no. (scph-?????)? and the main board no.?

[easte24]

yes, i've had a few for almost 2 weeks
75001 GH-036-51/ GH-040-51
those are the 2 that I have seen

[screenspinner]

i thought 75001 is v14!?

[easte24]

V15 also

[spedmetal]

good job boys.. I can't figure out why sony has to keep releasing new boards one after the other. Thread stuck for awhile.. at least until v16 comes out :banghead:

Thanks man :) ... yeah I agree this is the third version in just a few months!

I think I might have noticed a way to determine a V14 from a V15. They are both model numbers SCPH-75001 of coarse, but following the model number is a small lower case letter. The V14 that I have seen are SCPH-75001a and the V15's are SCPH-75001b.

I installed a CC1.0 in a V15 tonight and its working just great. The good thing about the CC1.0 is even with the new V14's and V15's the CDVD controller is still being patched correctly with the stock flash meaning you can upgrade the chip from stock with the same upgrade disc you would for any other console. The DMS4 is working with the V14's but you have to upgrade from Dev1 mod. Not hard to do but if your the one time home installer you will need a second PS2 that is either chipped or using the exploit on a non-slim PS2 in order to get the upgrade ELF on the memory card. Not every one has a second PS2 to do this with. Here is a picture of the CC1.0 ins a V15.

http://www.norcalmods.com/graphix/v15/v15-cc10-aman.jpg

[sunny]

Is v15 USA only or is it UK as well ...
(good work!)

Thanks.

[Charged]

C'mon pplllll .... need help on the gh-040-12 ...............

[laser]

@ all: All the consoles are still v14 - there is no v15 out yet.

@ Charged: GH-040-12 is here: http://www.crystal-chips.com/documents/diagrams/cc11/cc11_v14c.jpg

[spedmetal]

@ all: All the consoles are still v14 - there is no v15 out yet.

@ Charged: GH-040-12 is here: http://www.crystal-chips.com/documents/diagrams/cc11/cc11_v14c.jpg


Thats what the scene has adopted to call tham so yeah there is I guess a V15... the layout is different then a V14 so .....yupe I would say we can call them V15's.

[laser]

GH-37 and GH-41 were the first v14s. Just thought it wouldn't make much sense to call the older board revisions like GH-36 and GH-40 v15s.

[spedmetal]

I see your point. In fact the DMS team is calling what we have been calling the V15 .... they are calling a V14 also.

[laser]

Yes, Crystal Team calls them v14 too: http://crystal-chips.com/main/content/view/27/42/lang,en/