Help with crystal C1.0 on V14

[Subplay]

Hi all here is one for you guys.

I have installed many C1.1`s on V14 with no problem what so ever but today I have installed my first C1.0 on a V14 everything is fine works great. but while the console is on standby and i put the lid down the standby light will go off and you can`t turn on the console. when i lift the lid back up you can turn on the console and then close the lid after and it works fine. It only seems to be when the front lid switch is down on standby the console will not turn on. Thats happening to all the ones i mod with the C1.0 whats going on is there something i need to do?

Thanks in advance

[Asiron]

Hi,

I can't help you...but I have a question. Do you put down a Fix on the motherboard with a cc1.1 and a v14 ?

Thank you. :)

[Subplay]

Hi mate,

No extra mod is required for the v14 laser fix has been sorted from the V13 up

[imaviet]

having the same problem...i guess the C1.0 has a problem with v14.

[crans]

update your software with dev1 mode

[nirbeltran]

well you have wired the To point and thats whats giving you the no standby light . just take it off and everything will work fine .
no need for T0 on cc1.0

[imaviet]

well you have wired the To point and thats whats giving you the no standby light . just take it off and everything will work fine .
no need for T0 on cc1.0

oh wow, ill try that tomorrow. thanks for the tip!