retro
05-14-2005, 06:06 AM
I found out that if you trying to boot infoNES from mass: (usb)
it will hang at "loading hdd" because the hdd modules is not loaded.
To make this work you have to run it from hdd or before boot you have to browse to the hdd in your elfloader (i use launchELF 3.33) to make the hdd modules load, then it's bootable from usb.
im guessing this will work for infoGB to.
just wanted it to be mentioned.
it will hang at "loading hdd" because the hdd modules is not loaded.
To make this work you have to run it from hdd or before boot you have to browse to the hdd in your elfloader (i use launchELF 3.33) to make the hdd modules load, then it's bootable from usb.
im guessing this will work for infoGB to.
just wanted it to be mentioned.