Magic 3 in PAL V5, diagram and solved problems. :)

[Frankieboy]

Pick my diagramm up and enjoy it. :-)

If you have problems with DVD not booting or reading, try the alternative W point.

If you have problems with Reset not working good, try 16 kOhm resistor instead of capacitor or original 33 kOhm resistor.

16 kOhm and the alternative "right" W piont work perfect in my PAL V5.

I used the RCE074 source code from this board here. :)

Assembled with sasm 1.48.

C:\ sasm /p sx28ac rce074.asm

The resulting hex file was progged into SX28AC DIP version.

fuse=7f2 (code protection= enabled)
fuse=7fa (code protection= disabled)
fusex=f7f

Code works perfect. :)

Greetz to all people in the homebrew scene. :)

Frankieboy :-)

[EnTiTy]

glad to see my magic 3 hombrew pinout diagrams are getting used:)
EnTiTy

[maltloaf]

that yours ?? ;) i been touting that everywhere !! :)

maltloaf

[EnTiTy]

yep its mine glad im good for something lol .
EnTiTy:)

[SonOfLiberty@w]

Does someone has a diagram for the v3? i used the search option, but v3 is under the minimum word length.

SonOfLiberty

[EnTiTy]

just use the v3 diagram from china magic and use my pinout on the v5 diagram simple as that.
EnTiTy

[Frankieboy]

yes, it is a combination of china-magic.com and entitys diagramm. :)

i put all informations togehter with the 2 trouble shooting tipps.

entitiys diagramm is used a lot. some people modified it with other resistor values, capacitor values.

by the way, i removed the the wrong N and M in your diagramm. did you see that? hi hi.... :)

and i put in the alternative W point. that helps me a lot... :)

this diagamm was made as a summary of all informations from this board to help a newbie creating his own homebrew magic 3.

i thought, everbody would understand this, but when i read your posts, i see, i had to clarify this.

i think, fo a newbie this diagramm is a little help. no information is developed by me. but i collected informations and put all in one diagramm. like a small mini - tutorial.

everthing clear now for you? i hope... :)

Frankieboy :)

[EnTiTy]

i dont mind you altering anything frankieboy aslong is it helps the scene im happy i had not noticed at all that m and n were the wrong way round im just making a step by step tutorial now for building the fluffy 2 and building the homebrew magic3 im not too fussed about being credited for anything im just glad its being used your welcome to a copy of the tut when its done and can help me weed any errors out if you want.
EnTiTy

[Robot]

had same problem with dvd freezing on a v3 today , tried an alternate W point and everything is fine now :) cheers

[eltempranillo]

frankieboy please, test your console whith kingdom hearts play it and dont touch nothing.... let the pesentation pass continusly.
If it´s pass ten or more times whithout freezes please post it.

[jyck]

Hi, anyone can put the Final Code for Magic3?No beta, please.

And, Frankieboy, you have used a Resonator or a quarz cristal?

Thx

[Frankieboy]

i will test "kingdom hearts" as you described the next days. :)

i used the 50 mhz murata ceramic resonator as you can see in the diagram.

my friend uses the same installation in V7 pal console and has success with 1 uF or 10 uF capacitor between +5 volt an GND. maybe this could help also at ohter ps2 models.

[jyck]

ok thx. you can put he .hex compiled in this thread please? i cannot find it, i see a lot of them, but i don´t know what is the best.

Thx

[crouso]

can u also take a look on my post here?

http://www.ps2newz.net/forums/showthread.php?s=&threadid=2576&perpage=15&pagenumber=20

its a PAL v7, i had to modify the OSC1/OSC2 as shown on the pinouts because i use a quartz resonator, so i have to de-connect OSC2 (when i look on datasheet of scenix) - right?

regards,
crouso